3/27/2023 0 Comments Localizer course symbolThe S元0 must be receiving a valid ILS, or localizer, and the MX20 must have airports turned on for this feature to be active. A published localizer back course approach at the airport is not necessary to enable this feature. Since the S元0 reverse-senses the needles, a standard “chase the needle” approach may be made and the localizer “front course” graphic is always used on the MX20. The localizer back course graphic is shaded on the left side. The localizer front course graphic is shaded on the right side. If you enable the localizer back course feature of the S元0, the MX20 will then draw a localizer “front course” graphic extending from the reciprocal runway. The MX20 will draw the “front course” on its display when a localizer frequency is tuned into the S元0. The standard ILS symbol is shown in magenta on the MX20 display. The half-dotted, half-empty symbol identifies a localizer course. The S元0 Nav function provides an overall graphic view of the selected airport and approach based on runway extensions and the selected frequencies. The half-dotted, half-empty symbol identifies a localizer course. When either an ILS or localizer is tuned on the S元0, the MX20 will display the currently tuned approach on the appropriate airport runway. The S元0 must be receiving a valid signal from the VOR and the MX20 must have VOR symbols turned on for this feature to be active. The OBS line will only be drawn from the active VOR, not the monitored VOR. This feature provides a quick view of your position relative to both the VOR and the tuned radial to help improve situational aware- ness. The selected value will be shown on the line. The OBS (Omni-Bearing Selector) value selected in the S元0 will be shown as a line from the tuned VOR station in magenta on the MX20 display. VOR information is always shown in the IFR and VFR Chart functions. The MX20 must have VOR symbols turned on for this feature to be active in the Custom Map function. The radial and distance information comes from your GPS, not the S元0. The VOR information box for the selected VOR will show the distance and radial-from bearing between your present position and the VOR.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |